RCR-CR-KIT-187-F
$747.50
The Raven On-Landing Parachute Release (ROPR) is a patented device that allows a parachute to be automatically released from a payload upon landing. This mitigates possible damage caused by wind that could otherwise drag a valuable payload after landing.
Unlike other on-landing release devices, the Raven On-Landing Parachute Release is designed specifically for UAV and rocketry use and is lightweight, compact, and easy to use.
For people undergoing ASTM flight testing, the ROPR minimizes damage from multiple test flights where wind conditions can damage the drone being tested.
This type of device has many applications for situations where having the parachute detach after landing is a huge benefit, such as landing drones, rockets and other UAS. Additional uses include (but are not limited to) water drop payloads such as sonobuoys - where the payload needs to detach after splashdown - and airdrop cargo systems.
In order to work reliably, the ROPR has an internal hold timer that assures the parachute will not be released early after initial deployment due to opening bounce or other deployment shocks. The hold timer locks the device while the parachute is opening and unstable.
After being under chute in steady descent for a period of time, the hold timer rotates to allow for release only after the landing - when the pull of the parachute unloads. Under no conditions can the parachute release early as long as the main parachute is open and the ROPR remains under load.
The Raven hold timer is available in two variants, the FAST unit has a hold time between 3 to 5 seconds. The SLOW unit has a hold time between 6 to 9 seconds. The FAST variant can be used where the deployment altitude is lower. The SLOW variant can bs uses when the parachute needs more time to reach stability.
Specifications |
|
---|---|
Maximum Recommended Recovery Weight |
100 lb (50 kg) |
Minimum Recommended Recovery Weight |
7 lb (3.2 kg) |
Maximum Sustained Pull Force |
800 lb (360 kg) |
Maximum Shock Load |
1500 lb (680 kg) |
Physical Specifications |
|
Weight |
4.7 oz (132 g) |
Overall Length |
6" (152 mm) |
Body Diameter |
1.13" (28.7 mm) |
Environmental Specs |
|
Hold Lock Time at 14°F (-10°C) |
Fast 5 to 15 sec, Slow 7 to 18 |
Hold Lock Time at 75°F (24°C) |
Fast 2.5 to 5.5 sec, Slow 5.5 to 9.5 |
Hold Lock Time at 122°F (50°C) |
Fast 2.25 to 5.5 sec, Slow 4.5 to 8 |
Minimum Operational Temperature |
14°F (-10°C) |
Maximum Operational Temperature |
122°F (50°C) |
Materials |
|
Aluminum Finish |
Blue Anodizing |
Upper and Lower Shells |
6061-T6 Aluminum |
Catch Pin and Top Extension |
High Strength Stainless Steel |
Catch Bearing |
Hardened Stainless Steel |